Auro 2 in 1 Oil-Wax Classic 129
Product calculator
Product Overview
Main purpose
For the improvement and protection of wooden surfaces
Use it on
Wooden surfaces, particularly for wooden furniture. Can also be used on wood based materials and floors
Overview
This is Auro’s solvent based 2 in 1 Oil-Wax Classic 129 for interior use. It is made from natural ingredients from renewable and mineral sources. The solvents used in this product are all naturally occurring. (Auro have a solvent free version of this product Auro One-off oil wax 125) This is a versatile product that can be used on all types of furniture and wooden surfaces throughout the house.
Where to use it
The Auro 2 in 1 Oil-Wax Classic 129 is for internal use on wood, wood based materials, it is particularly for use on wooden furniture, but it can also be used on wooden floors. It is available in a 750ml and 5 litre can and covers 20sq/m per Litre.
What it does
The oil-wax treats the surface and protects it from dirt, spills, water etc… while allowing the surface to breathe.
Why we love it
It is made from natural materials and it gives off a beautiful citrus scent when being applied. It is a time saver as you can oil and wax the surface in one application.
How it works
The oil fills the open pores and a thin layer of wax creates an additional protection to the surface while allowing it to breathe.
Features
- Environmentally Friendly
- Transparency of Ingredients
- Easy application
- Product is Compostable
- Breathable Oil
Benefits
- Consistent Ecological Raw Materials
- Brush, roller, spray
- Good coverage 20 sq/m per Litre
- Polish between 10 minutes and 60 minutes
- Dust dry after 10 hours
- Overcoatable after 24 hours
- Hard wearing
- Tested according to DIN EN 71, Part 3, “Safe for toys”
- Tested according to DIN 53160, “Saliva- and perspiration-proof”.
- Will not trap moisture in the wood
Questions
There are currently no questions and answers published for this product
Technical Details
Key Technical Data
Installation Guide
Substrate must be dry, even, absorptive, clean, free of grease, chemically neutral and free of substances bleeding through.
The surface should be cleaned and sanded if necessary and all dust removed before applying the oil.
The oil can be thinned with Auro Orange Oil if necessary. Apply the oil by brush, roller or by spraying.
The surface must be polished from 10 minutes to 60 minutes after application. If polished a short time after application the less the sheen is whereas if some time is left to pass before polishing the higher the sheen. After 1 hour the surface can not be polished anymore. Surfaces which are subject to heavy wear may require several coats and the surface must be polished between each coat.
For regular maintenance the Auro Floor Care Emulsion 431 is best and when a deep cleaning is needed the Auro Power Cleaner 421 should be used.
Tools should be cleaned with Auro Orange Oil 191